ZERUST® AxxaVis™ HST-10
Use ZERUST®/EXCOR® AxxaVis™ HST-10 to treat hard water and deactivate chlorides. Add product to tap water to make it suitable for hydrostatic test processes conducted on pressure vessels such as pipes, heat exchangers, storage tanks, and ship voids.
Features
- Deactivates ionic contaminants
- Facilitates use of hard water
- Prevents rust and scale
- Safe and non-hazardous
Product Description
ZERUST® AxxaVis™ HST-10 powder additive deactivates ionic contaminants found in municipal water sources that cause rust and hard water deposits on metals. AxxaVis™ HST-10 is a highly effective way to protect the interior surfaces of pressure vessels from corrosion that can rapidly form during and after hydrostatic testing. Designed for use on ferrous metals. Not compatible with aluminum. Test before use on copper, brass, or zinc.
AxxaVis™ HST-10 is designed to be safe, convenient to use, and environmentally friendly.* Used product can be analyzed for quality and, in some cases, reused. However, spent ZERUST® AxxaVis™ HST-10 working fluid may be discharged into the soil or marine environments (subject to normal legislative restrictions). Check with your ZERUST®/EXCOR® representative for an operating guide with information on reuse and disposal. Always check local, state, and national regulations before disposal.
Resources
Availability
ZERUST® AxxaVis™ HST-10 is in stock and available in 25 lb case and 800 lb super sack.
| Part Number | Quantity | Protection | |
|---|---|---|---|
| 460-M-00002CA | 25 Pound case | Multimetal | |
| 460-M-00002SU | 800 Pound supersack | Multimetal |
Related Products
-
AxxaVis™ PX-05-AN is a powder that, when added to rinse water, enables it to neutralize acids left by cleaning processes. Use to control flash corrosion on metals caused by acids left over from cleaning and rust removal treatments, such as ZERUST® AxxaClean™ rust removers.
-
AxxaVis™ PX-10-HRD is a powder metalworking fluid additive that conditions hard water when deionized water is unavailable. Use to treat tap water with a hardness of up to 700 ppm CaCO3 and prevent scale and scum. In addition, it increases the performance of ZERUST® products that require dilution, such as Axxatec™ and AxxaWash™ concentrates.
-
Typical Axxanol™ 33 applications include corrosion protection for in-line rolling mill applications, cold rolled sheets and coils, wire bar, and cast and machined ferrous and non-ferrous metals during shipment and storage.
-
Use ZERUST® Axxanol™ 33CD to safely protect metals and cast or machined parts during shipment, storage, and work-in-progress. It protects multiple metal types against corrosion for up to 6 months‡ under shelter.
-
Use Axxanol™ 34CD to protect metal parts and cast and machined metals during shipment, storage, and work-in-progress. In addition, Axxanol™ 34CD is perfect for protecting parts during program changeover periods in the assembly process.
-
Ideal for cleaning and protecting equipment and machinery that is temporarily left outdoors.
-
This invisible rust prevention spray with VCI provides robust corrosion protection to metal surfaces in hard-to-reach voids, crevices, and chambers.
-
ZERUST® Axxanol™ 750-NV is a ready-to-use oil-based rust preventive liquid.
-
Axxanol™ Spray-G is a sprayable rust preventative grease that can be used as a light lubricant while providing exceptional corrosion protection. In addition, Spray-G is resistant to water and is compatible with most rubber and plastic materials.
-
Axxanol™ Z-Maxx Series can be used as a light lubricant while it provides exceptional corrosion protection. In addition, the product is resistant to water and is compatible with synthetic rubber and plastics.
-
Use Axxatec™ 77C to protect bare metal surfaces (such as golf club shafts) during assembly, large equipment during temporary storage, and when water-based spray-on, in-line production, or dipping applications are desired.
-
Use Axxatec™ 80C Concentrate to protect bare metal surfaces during assembly, large equipment during temporary storage, and in situations where water-based spray-on, in-line production, or dipping applications are desired.
-
Axxatec™ 8110C was designed for use in closed systems, such as aqueous cooling systems or hydraulic systems, and will protect iron, steel, aluminum, copper, and brass parts within these systems for up to 1 year‡. It is water-based and easily diluted with coolant or water-based hydraulic fluids.
-
Axxatec™ 85-F combines the power of a water-based rust preventative with ZERUST® Vapor Corrosion Inhibitors (VCIs) to protect ferrous metals. It is designed for use as a foggable rust protection for the inside void spaces of tanks, packages, and enclosures.
-
Axxatec™ 87-M is a foggable water-based rust preventative that contains ZERUST® Vapor Corrosion Inhibitors (VCIs) used to protect the inside void spaces of tanks, packages, and enclosures. In addition, it protects ferrous metals and is multimetal compatible.
-
AxxaVis™ PX-05-AN is a powder that, when added to rinse water, enables it to neutralize acids left by cleaning processes. Use to control flash corrosion on metals caused by acids left over from cleaning and rust removal treatments, such as ZERUST® AxxaClean™ rust removers.
-
AxxaVis™ PX-10-HRD is a powder metalworking fluid additive that conditions hard water when deionized water is unavailable. Use to treat tap water with a hardness of up to 700 ppm CaCO3 and prevent scale and scum. In addition, it increases the performance of ZERUST® products that require dilution, such as Axxatec™ and AxxaWash™ concentrates.
-
Typical Axxanol™ 33 applications include corrosion protection for in-line rolling mill applications, cold rolled sheets and coils, wire bar, and cast and machined ferrous and non-ferrous metals during shipment and storage.
-
Use ZERUST® Axxanol™ 33CD to safely protect metals and cast or machined parts during shipment, storage, and work-in-progress. It protects multiple metal types against corrosion for up to 6 months‡ under shelter.
